T-slot test platform

Detailed T-Slot Test Platform Testing System Solution
T-slot test platforms play a pivotal role in mechanical manufacturing, applicable to various inspection work channels for welding. Their planar work surfaces and groove/hole structures are used for cleaning welding slag and waste, while the tank-like features secure various components. Of course, ground rails can also be used for equipment without holes or grooves, such as aircraft. However, deformation of the T-slot test platform can lead to inaccurate mechanical measurements or inspections, making its maintenance and upkeep crucial.

The surface of castings on T-slot test platforms is prone to shrinkage. If this phenomenon occurs, appropriate treatment methods must be taken. During operation, pay attention to the sounds of the T-slot test platform; if a creaking noise is heard, it indicates that the back cap has loosened. Immediately stop the machine, remove the protective cover on the bed, and tighten it with a wrench. Then observe the凹陷 (depression) condition of the T-slot test platform and select the correct treatment method to address it.
Whenever temperature changes, the dimensions of the T-slot test platform and the workpiece also change. While this is beyond our control, we can manage the environmental temperature. For precision measurements, the T-slot test platform should be used in a constant-temperature workspace controlled at 20°C. Typically, air conditioning can maintain the room temperature at a constant 20°C. In such an environment, the variation of the T-slot test platform and the measured workpiece should not exceed ±0.5~1°C. Only when placed in a constant-temperature workspace can the T-slot test platform achieve its measurement accuracy.
During the use of the T-slot test platform, a deeper understanding is necessary to avoid errors and utilize it more effectively. All expectations can be realized on the T-slot test platform, including applications for processes and plates that differ, with or without holes, and with planar or modeled work surfaces. The material of the T-slot test platform is cast iron HT200-300, with a work surface hardness of HB170-240. Through two artificial treatments (artificial annealing at 600-700 degrees and aging for 2-3 years), the product exhibits stable and reliable precision.
When purchasing a T-slot test platform, such as experimental flat plates or motor test T-slot test platforms, parameters like specifications, load capacity, and installation methods must be confirmed. If you are uncertain about these details, seek assistance from T-slot test platform manufacturers for detailed planning. When used as a measuring tool, ensure that the precision error is as small as possible. The following methods can help reduce errors:
To minimize the impact of temperature on the T-slot test platform, also note the following: Before inspecting workpieces, the T-slot test platform must undergo "temperature stabilization." This refers to placing the T-slot test platform and the workpiece in the same temperature environment for a certain period until their temperatures converge. During stabilization, the measured workpiece and the measuring instruments are usually placed together on the T-slot test platform to shorten the stabilization time. Small workpieces can also be stabilized on the measuring instrument, while large workpieces may require placing the T-slot test platform on the workpiece, depending on the actual situation. A rough evaluation can follow the one-third principle: the smallest scale value of the selected measuring instrument should be less than or equal to one-third of the workpiece's tolerance value. Additionally, understanding the reasons for the stable precision and minimal deformation of ribbed plate structure T-slot test platforms is crucial. The ribs are designed to enhance the platform's load-bearing capacity and reduce the likelihood of deformation under heavy loads.
Qili Machine Tool, Ms. Xie, 13785751790